HRAP Equal Angles

Our integrated manufacturing edge gives us the ability to produce steel in a variety of finishes, surface options and profiles

20 × 20 mm to 127 × 127 mm Up to 6.4 metres ASTM A484, EN10056

OVERVIEW

Product Description

Stainless steel HRAP equal angle for applications leaning towards structural and framework applications. SS HRAP Equal angle is used in metal construction, industrial and agricultural applications. Various pieces of metal frames, metal brackets, steel chassis, components and parts of machinery can be made from equal angles.

Equal angles are available with various types of bar end finishes for example-chamfered ends and plain ends without burrs or sharp edges. They go through hot rolling, solution annealing and pickling to improve their material properties. As one of the best stainless steel equal angle manufacturers in India, we are always particular about the chemical and mechanical properties of our bars.

Weight per metre for each leg size and thickness is in the equal angle weight chart, and the arithmetic behind it, including where it reads low against a rolled section, is in the equal angle guide.

Hot rolled annealed and pickled stainless steel equal angles produced by Laxcon Steels

SPECIFICATION

Supply Conditions

Length: Up to 6.4 metres
Tolerances: ASTM A484, EN10056
Supply condition: Hot rolled, Annealed & Pickled (HRAP)
Grit polish: As per customer’s request
Bars End Finish: Deburred Ends, Plain Ends without Burrs or Sharp Edges
Specifications: As per EN, DIN, JIS, ASTM, BS, ASME, etc.

Shot Blasting as per customer’s request.
Inkjet printing as per grade & size.
Free from Radioactive elements, Mercury & Lead contamination
Grade confirmation through PMI testing with Handheld Spectrometers
Weight per metre for every listed size: metal weight calculator

Size Range

LEG SIZE (MM)	LEG SIZE (IN)	THICKNESS (MM)	THICKNESS (IN)
20 × 20	3/4" × 3/4"	3	1/8"
25 × 25	1" × 1"	3, 4, 5, 6	1/8", 1/6", 3/16", 1/4"
30 × 30		3, 4, 5	1/8", 1/6", 3/16"
31.75 × 31.75	1-1/4" × 1-1/4"	3.17, 4.76, 6.35	1/8", 3/16", 1/4"
38.1 × 38.1	1-1/2" × 1-1/2"	3.17, 4.76, 6.35	1/8", 3/16", 1/4"
40 × 40		3, 4, 5, 6	1/8", 1/6", 3/16", 1/4"
50 × 50	2" × 2"	3, 4, 5, 6, 7, 9, 9.52, 10	1/8", 1/6", 3/16", 1/4", 9/32", 3/8", 3/8", 2/5"
60 × 60		5, 6, 7, 8, 9	3/16", 1/4", 9/32", 5/16", 3/8"
63 × 63		5, 6, 7, 8	3/16", 1/4", 9/32", 5/16"
63.5 × 63.5	2-1/2" × 2-1/2"	4.76, 6.35, 9.52	3/16", 1/4", 3/8"
65 × 65		5, 6	3/16", 1/4"
75 × 75 / 76.2 × 76.2	3" × 3"	5, 6, 10	3/16", 1/4", 2/5"
100 × 100 / 101.6 × 101.6	4" × 4"	6, 9, 10	1/4", 3/8", 2/5"
120 × 120		10, 12, 13, 15	2/5", 1/2", 64/125", 3/5"
125 × 125		10, 12	2/5", 1/2"
127 × 127		9.52, 12.7	3/8", 1/2"

Frequently Asked Questions

What HRAP equal-angle sizes are listed?

Laxcon publishes HRAP stainless steel equal angles with legs from 20 x 20 mm through 127 x 127 mm, with the available thicknesses listed for each leg size.

Which standards and lengths apply to equal angles?

Stainless steel equal angles are supplied up to 6.4 metres in hot-rolled, annealed and pickled condition to ASTM A484 and EN 10056 tolerances.

Which finishing and identification options are available?

Equal angle ends can be deburred or supplied plain without sharp edges. Grit polishing and shot blasting are available on request, with inkjet marking and PMI grade confirmation.

How can HRAP stainless steel equal angles be packed and traced?

Laxcon packs HRAP stainless steel equal angles in standard bundles of 500 to 1,000 kg with HDPE or LDPE wrapping and two lifting slings. ISPM 15 wooden boxes and fibre-tube packing are available, and every bundle is marked with heat number, grade, size, and net and gross weight.

What should an RFQ for HRAP stainless steel equal angles include?

An enquiry for HRAP stainless steel equal angles is quotable when it states the grade, governing standard, metric size or profile, tolerance, finish or heat-treatment condition, length, quantity, test or inspection requirement, and delivery destination.

CATALOGUE