Supply conditions
|
| Length |
Length – upto 6.5 metres |
| Cold Drawn |
Centreless Ground, Peeled & Polished, Rough Peeled or Smooth Turned Bars |
| Tolerances |
h7, h8, h9, h10, h11, k12, k13 |
| Surface finish |
Ra upto 0.2 mm (8.7 RMS) |
| Straightness |
Upto 0.5 mm per metre |
| Grit polish |
K240, K320 or as per Customer’s requirement |
| Heat treatment |
Soft Annealing, Solution Annealing, Oil & Water Quenching, Tempering & Aging |
| Oil & Water |
Quenching, Tempering & Aging |
| Bars End Finish |
Chamfered ends 300,450,600 and plain ends without Burrs on Sharp Edge |
| Specifications |
As per EN, DIN, JIS, ASTM, BS, ASME, GOST, AISI/Nace MRO175, MR0103 |
| Free from Radioactive elements, Mercury & Lead contamination |
| Grade confirmation through PMI testing with Handheld Spectrometers |
