---
title: "310S Stainless Steel Round Bar, 16 to 125 mm | Laxcon Steels"
source: "https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-310s/"
description: "AISI 310S stainless steel hot rolled round bar, made to order by Laxcon Steels, India: composition, equivalents, weight per metre and tolerances."
---
# AISI 310S Round Bars

*[Home](https://www.laxconsteels.com/) > [Products](https://www.laxconsteels.com/products/) > [Hot Rolled Round Bars](https://www.laxconsteels.com/products/hot-rolled-round-bars/) > AISI 310S*

AISI 310S hot rolled round bar is a high chromium, high nickel austenitic bar for parts that work hot, such as furnace rollers and kiln supports.

16 to 125 mm Austenitic stainless steel Made to order

## AISI 310S hot rolled round bar

AISI 310S hot rolled round bar is round bar rolled from an austenitic stainless steel made for continuous service in hot air and combustion gases. Its chromium builds the oxide film that resists scaling at temperatures where AISI 304 and AISI 316 lose it, and its nickel holds the austenitic structure through repeated heating and cooling. AISI 309S, the grade one step below, carries less of both elements and gives out at a lower temperature. AISI 310 shares the same chromium and nickel range but allows carbon up to 0.25 percent; the S grade holds carbon to 0.08 percent, so less chromium carbide forms at the grain boundaries and a welded joint keeps more of its corrosion resistance.

The bar is supplied solution annealed, heated until the carbides go back into the metal and then cooled fast so they stay there. In that condition it is non-magnetic, it cannot be hardened by heat treatment, and it gains strength only by cold work. ASTM A276 sets 515 MPa tensile strength and 205 MPa yield strength as the annealed minima. The grade work hardens under the tool, so turning it asks for sharp edges, a firm feed and lower speeds than carbon steel. It is welded with a matching 310 filler and without preheat. Round bar in this grade is machined into furnace rollers and hearth fixtures, radiant tube and burner parts, kiln and annealing furnace supports, and shafts for heat treatment equipment.

Composition limits in weight percent are carbon 0.08 maximum, manganese 2.0 maximum, sulphur 0.03 maximum, phosphorus 0.045 maximum, silicon 1.5 maximum, chromium 24.0 to 26.0 and nickel 19.0 to 22.0.

## AISI 310S hot rolled round bar supply conditions

| Property | Value |
| --- | --- |
| Size range | 16 mm - 125 mm (5/8" - 5") |
| Length | Up to 8 metres |
| Tolerances | ASTM A484, EN10060 |
| Heat treatment | Solution annealing |
| Grade | AISI 310 S (310S, SUS 310S, 1.4845, S31008) |
| Family | Austenitic stainless steel |
| Supply | Made to order in this grade; every published size of the form |

## Composition of AISI 310S

| Element | Symbol | Minimum % | Maximum % |
| --- | --- | --- | --- |
| Carbon | C |  | 0.08 |
| Manganese | Mn |  | 2.0 |
| Sulphur | S |  | 0.03 |
| Phosphorus | P |  | 0.045 |
| Silicon | Si |  | 1.5 |
| Chromium | Cr | 24.0 | 26.0 |
| Nickel | Ni | 19.0 | 22.0 |

Composition, weight percent, balance iron. From the Laxcon Steels grade reference.

## Equivalents of AISI 310S

| Standard | Designation |
| --- | --- |
| UNS | S31008 |
| EN number | 1.4845 |

Equivalence means nearest counterpart, not identity: each standards body sets its own composition window, so the limits of the standard named on the order govern.

## Pitting resistance

The pitting resistance equivalent number of AISI 310S runs from 24.0 at the specified minimum chromium, molybdenum and nitrogen to 26.0 at the maxima, computed as PREN = Cr + 3.3Mo + 16N (International Molybdenum Association). It ranks resistance to chloride pitting against other austenitic and duplex grades and nothing else: it does not predict crevice corrosion, stress corrosion cracking or service life. The [pitting resistance reference](https://www.laxconsteels.com/grades/pitting-resistance/) carries the full table.

## Governing standards

| Property | Value |
| --- | --- |
| EN 10088-3 | Stainless steels: technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products for general purposes. Composition, heat treatment condition and mechanical properties per grade. |
| EN 10060 | Hot rolled round steel bars for general purposes: dimensions and tolerances on shape and dimensions. |
| ASTM A276/A276M | Stainless steel bars and shapes: composition, condition, mechanical properties and finish designations for hot-finished and cold-finished bar. |
| ASTM A484/A484M | General requirements for stainless steel bars, billets and forgings: permissible variations in dimensions, straightness, weight and length, and the test and marking requirements every bar order inherits. |
| ASTM A479/A479M | Stainless steel bars and shapes for use in boilers and other pressure vessels: the bar specification a pressure-part drawing calls for. |
| ASTM A314 | Stainless steel billets and bars for forging. |
| NACE MR0175 / ISO 15156 | Materials for use in H2S-containing environments in oil and gas production: the sour-service limits on hardness and condition. |
| EN 10204 | Metallic products, types of inspection documents: the 2.2 test report and the 3.1 and 3.2 inspection certificates a purchase order can call for. |

## Weight per metre

| Diameter (mm) | kg per metre | Metres per tonne |
| --- | --- | --- |
| 16 | 1.59 | 629.5 |
| 17 | 1.79 | 557.6 |
| 18 | 2.01 | 497.4 |
| 19 | 2.24 | 446.4 |
| 20 | 2.48 | 402.9 |
| 21 | 2.74 | 365.4 |
| 22 | 3.00 | 333.0 |
| 23.2 | 3.34 | 299.4 |
| 24 | 3.57 | 279.8 |
| 25 | 3.88 | 257.9 |
| 26 | 4.19 | 238.4 |
| 27 | 4.52 | 221.1 |
| 28 | 4.86 | 205.6 |
| 30 | 5.58 | 179.1 |
| 32 | 6.35 | 157.4 |
| 34 | 7.17 | 139.4 |
| 36 | 8.04 | 124.4 |
| 37 | 8.49 | 117.7 |
| 38 | 8.96 | 111.6 |
| 40 | 9.93 | 100.7 |
| 42 | 10.95 | 91.4 |
| 45 | 12.57 | 79.6 |
| 47 | 13.71 | 73.0 |
| 48 | 14.30 | 69.9 |
| 50 | 15.51 | 64.5 |
| 53 | 17.43 | 57.4 |
| 56 | 19.46 | 51.4 |
| 57.5 | 20.52 | 48.7 |
| 60 | 22.34 | 44.8 |
| 63 | 24.63 | 40.6 |
| 66 | 27.03 | 37.0 |
| 67.5 | 28.27 | 35.4 |
| 70 | 30.40 | 32.9 |
| 73.5 | 33.52 | 29.8 |
| 75 | 34.90 | 28.7 |
| 77.5 | 37.27 | 26.8 |
| 80 | 39.71 | 25.2 |
| 83 | 42.75 | 23.4 |
| 85 | 44.83 | 22.3 |
| 88 | 48.05 | 20.8 |
| 90 | 50.26 | 19.9 |
| 93 | 53.67 | 18.6 |
| 95 | 56.00 | 17.9 |
| 98 | 59.59 | 16.8 |
| 100 | 62.05 | 16.1 |
| 105 | 68.41 | 14.6 |
| 106 | 69.72 | 14.3 |
| 110 | 75.08 | 13.3 |
| 115 | 82.06 | 12.2 |
| 120 | 89.35 | 11.2 |
| 125 | 96.95 | 10.3 |

Density 7.90 g/cm³, diameter squared x 0.006205. Sizes are the published range at the nominal diameters shown.

## Ordering AISI 310S hot rolled round bar

An enquiry for this grade in this form states the grade and the governing standard, for example AISI 310S to ASTM A276 or EN 10088-3, the solution annealed condition, the diameter with the tolerance to ASTM A484 or EN 10060, the surface as black, spot ground or fully ground, the cut length, the quantity, the test certificate type to EN 10204, and any test called for, such as ultrasonic testing or PMI. Laxcon Steels rolls the bar to order.

## Other grades in Round Bars

- [**AISI 304** The general purpose austenitic stainless steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-304/)
- [**AISI 316** The molybdenum-bearing austenitic grade](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-316/)
- [**EN 8** A medium-carbon unalloyed engineering steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/en-8/)
- [**Duplex 2205** The standard duplex stainless steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/duplex-2205/)
- [**SAE 4140** The chromium-molybdenum through-hardening steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/sae-4140/)
- [**AISI 303** The free-machining austenitic grade](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-303/)
- [**AISI 316L** The low-carbon version of AISI 316](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-316l/)
- [**AISI 410** The basic martensitic stainless steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-410/)
- [**SAE 4340** The nickel-chromium-molybdenum through-hardening steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/sae-4340/)
- [**AISI 416** The free-machining martensitic grade](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-416/)
- [**17-4 PH** The precipitation hardening stainless steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/17-4-ph/)
- [**AISI 420** A higher-carbon martensitic stainless steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-420/)
- [**AISI 431** A martensitic stainless steel with nickel](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-431/)
- [**AISI 304L** The low-carbon version of AISI 304](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-304l/)
- [**AISI 430** The standard ferritic stainless steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-430/)
- [**EN 24** A nickel-chromium-molybdenum engineering steel for heavy sections](https://www.laxconsteels.com/products/hot-rolled-round-bars/en-24/)
- [**Super duplex 2507** A super duplex stainless steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/super-duplex-2507/)
- [**AISI 321** AISI 304 stabilised with titanium](https://www.laxconsteels.com/products/hot-rolled-round-bars/aisi-321/)
- [**EN 19** A chromium-molybdenum engineering steel](https://www.laxconsteels.com/products/hot-rolled-round-bars/en-19/)

## AISI 310S in other forms

- [**HRAP Equal Angles** equal angle](https://www.laxconsteels.com/products/hrap-equal-angles/aisi-310s/)

[Hot Rolled Round Bars: every size](https://www.laxconsteels.com/products/hot-rolled-round-bars/) [AISI 310S composition and equivalents](https://www.laxconsteels.com/grades/aisi-310s/) [Weight calculator](https://www.laxconsteels.com/weight-calculator/) [Send the RFQ](https://www.laxconsteels.com/contact/?product=hot-rolled-round-bars)